Professional Water Heater Installation

• Tank (Storage) Water Heaters: These are the traditional models with a storage tank. They continuously heat and store a large volume of water, typically ranging from 20 to 80 gallons.
• Tankless (On-Demand) Water Heaters: These units heat water only when you need it, providing a continuous supply of hot water without storing it. They are more energy-efficient since they don’t have standby heat loss.

The size of the water heater you need depends on the number of people in your household and your typical hot water usage. Here’s a basic guideline:

• 1-2 people: 30-40 gallons
• 3-4 people: 40-50 gallons
• 5 or more people: 50-80 gallons

For tankless water heaters, the required flow rate (measured in gallons per minute) and temperature rise are important to determine, which can vary based on your location and usage habits.

The lifespan of a water heater typically ranges from 10 to 15 years. Tankless water heaters can last longer, around 20 years or more, if properly maintained. However, regular maintenance, such as flushing the tank and checking for leaks, can extend the life of any water heater.

• Electric Water Heaters: These are generally easier to install and maintain, but they may have higher operating costs depending on your local electricity rates.
• Gas Water Heaters: These tend to have lower operating costs in areas where natural gas is cheap. They can heat water faster than electric models, but installation may require venting to the outside.

Common signs of a failing water heater include:

• Lack of hot water or inconsistent water temperature
• Strange noises like popping or rumbling sounds
• Leaking water around the base of the unit
• Discolored water (rust-colored)
• Foul odors coming from the water

If you notice any of these issues, it may be time for a repair or replacement.

To increase energy efficiency:

• Set the thermostat to 120°F (49°C) – this is hot enough for most uses and will reduce energy consumption.
• Insulate your water heater and pipes to minimize heat loss.
• Perform regular maintenance, including flushing the tank to remove sediment build-up.
• Upgrade to a high-efficiency model (like a heat pump or tankless water heater) if your current model is old and inefficient.

To keep your water heater in good working condition:

• Flush the tank annually to remove sediment build-up (for tank heaters).
• Inspect the anode rod every 1-2 years and replace it if it’s corroded (this helps prevent tank rusting).
• Check for leaks or signs of corrosion.
• Test the thermostat to ensure it’s working properly.

Installation typically takes 4-6 hours for a traditional tank model, and a bit longer (6-8 hours) for tankless models, especially if any plumbing or electrical modifications are required.